Written for supermarket category managers, private-label and controlled-brand managers, and QSR or foodservice buyers. Shiiv Imports Pty Ltd trades as Shiiv Imports. We are a sourcing agent, importer and private-label builder, not a manufacturer. The partner plant fills the pack. The marked quantity sits beside the nutrition panel and the spec pack. Public email sales@shiv-impex.com. The desks are in Sydney, Auckland, Singapore, Ahmedabad, India and Texas, USA.
The front-of-pack number is not the nutrition panel
Taste and price can be approved on a pack that still fails a trade measurement check. The nutrition panel states nutrients per serving and per 100 g. The measurement mark states how much product the buyer is paying for. A serving size does not set the net quantity.
The National Measurement Institute's guide for manufacturers, packers, importers and sellers was updated on 27 November 2025. Business.gov.au says the laws apply to wholesale and retail, and that short measure can be fined. A foodservice carton with a stated net weight is in scope when it never faces a supermarket shelf.
What the mark has to show
Weight, volume, length, area or number must appear on the main display, and on any other face likely to be shown. Wine bottles and casks are the exception named in the guide. On a cylindrical, spherical, oval or conical pack, the mark must sit inside a 60 degree arc either side of the vertical centre of that panel.
Printed height follows the largest dimension: 2 mm at 120 mm or less, 2.5 mm over 120 mm and not over 230 mm, 3.3 mm over 230 mm and not over 360 mm, and 4.8 mm over 360 mm. Stamped or embossed characters must be at least three times the printed minimum. An NMI-approved printing device must be at least 3 mm high, in clear contrast. The quantity is net and excludes packaging. A gross shipper weight is not the retail net. Say which figure the artwork states, and which figure incoming quality will weigh.
Two ways a constant fill can comply
Under the average system, the sample average must not fall below the marked quantity, and no pack may be short by more than 5 per cent. In a sample of 12 or more, the permissible average deficiency is nil, aside from exceptions. Desiccating goods that lose moisture, such as the mushrooms and soap named in the guide, may have a greater allowance.
The Average Quantity System (AQS) is voluntary, for runs of at least 100 identical packs. It follows OIML R 79 on labelling and OIML R 87 on quantity. Australian AQS rules align fully with those recommendations and can differ from countries that implement them only in part, so a legal fill target at origin is not automatically legal here. The sample average must not sit below the marked quantity. A limited number of packs may exceed a tolerable deficiency. None may exceed twice that deficiency. The Institute calls this a 97.5 per cent assurance.
Regulation 4.36, reprinted in the AQS guide, sets that deficiency. The Federal Register of Legislation shows the 20 March 2024 compilation as the latest text of the regulations. From 200 g or mL up to 300, the allowance is 9 g or 9 mL, so a 250 g pack more than 18 g short fails even if the average is right. An inspector samples 50 from a lot of 100 to 500, 80 from 501 to 3,200, and 125 from 3,201 upwards, with three, five and seven allowed over, respectively. The importer's check must still show the lot complies before sale.
The e-mark, and what it shows
The pack has to show which system applies. An AQS pack carries the e-mark, at least 3 mm high, close to the stated quantity, on the principal display panel. A lookalike is an offence. Australian-made packs without the e-mark are assessed on the average system. On an imported e-marked pack, the inspector usually lacks the overseas production records and may test at the warehouse.
Whose name sits with the quantity
For goods packed in Australia, the guide requires the packer's name and a street address in Australia, or those of the person the goods were packed for. A post office box, an email or a website is not a substitute. Food also follows Standard 1.2.2 of the Food Standards Code: the name and business address, in Australia or New Zealand, of a supplier. The March 2026 compilation includes the packer, manufacturer, vendor or importer, and defines a business address as the street address or a description of the premises. The Institute's guide says imported food must show the importer's or seller's name and an Australian business address. On lines we import, that name is Shiiv Imports Pty Ltd. This note does not publish a street address. The public desk is sales@shiv-impex.com.
Where a partner factory holds HACCP, or a certificate under a scheme that GFSI benchmarks, the document belongs to that site and scope. GFSI benchmarks schemes. It does not certify a net quantity. Shiiv Imports holds ISO 9001 for sourcing, supplier selection and the file. The quality page sets out how the file is held.
What to lock before the first purchase order
On a catalogue line, confirm the marked net quantity, the system in use, and who weighs a sample before shipment and again before release in Australia. On private label and controlled brand, character height follows the finished pack. A Certificate of Analysis that is silent on quantity does not close the check. A catering sack and a retail pouch can share a recipe and still need different marks and tares.
Before you range
Check the file before the purchase order.
- Average system or AQS, and whether an e-mark sits on the principal display panel.
- Marked net quantity, tare, and the instrument that will check the lot.
- Character height and position on the finished pack, including a jar or bottle.
- Supplier name and business address, with no post office box in place of that address.
- Who holds the goods if a warehouse test fails, and the lot that hold would use.
Send the product, the pack, the channel and the marked quantity with a sourcing brief, or a private-label brief. We reply within one business day.
Questions buyers ask
Is the net quantity the same figure as the nutrition panel?
No. The panel states nutrients per serving and per 100 g. The measurement mark states the product in the pack, excluding packaging.
Does an e-mark mean the container has passed an Australian test?
No. It shows the pack is presented under AQS. On an import, an inspector may test the goods at the warehouse.
Does a factory food-safety certificate prove the fill weight?
No. HACCP, or a certificate under a GFSI-benchmarked scheme, belongs to the plant and the named scope. Shiiv Imports holds ISO 9001 for sourcing and the file.
Can the public email replace the address on the pack?
No. A post office box, email or website does not replace a street address on goods packed in Australia. Food needs a supplier's business address in Australia or New Zealand. sales@shiv-impex.com is the public desk.
Shiiv Imports Insights. Shiiv Imports Pty Ltd (ABN 15 158 243 442 / ACN 158 243 442). Trading name Shiiv Imports. Public email sales@shiv-impex.com. Cities: Sydney, Auckland, Singapore, Ahmedabad, India, Texas, USA. Sources: National Measurement Institute, Guide to the sale of pre-packaged goods (updated 27 November 2025); National Measurement Institute, Guide to the Average Quantity System; National Trade Measurement Regulations 2009 (compilation 20 March 2024); business.gov.au, Australian trade measurement laws; Food Standards Code, March 2026 compilation (Standard 1.2.2, and the definitions of supplier and business address).
