A private-label grocery pack is recyclable in Australia when it can be collected, sorted and reprocessed here. A symbol from another country does not answer that. The brand owner chooses the pack and signs the artwork. Shiiv Imports arranges the brief, the factory file and the artwork rounds. We do not make the pack, and we do not own the plant.
Written for supermarket category managers, private-label and controlled-brand managers, and QSR or foodservice buyers in Australia and New Zealand. Shiiv Imports Pty Ltd trades as Shiiv Imports. We are a sourcing agent and importer. We organise suppliers, freight, warehousing and logistics for buyers. We are not a manufacturer. Public email sales@shiv-impex.com. Desks: Sydney, Auckland, Singapore, Ahmedabad, India and Texas, USA. This note is not legal advice.
What the 2025 targets show
In 2018, industry and Australian governments set four National Packaging Targets for 2025, covering packaging made, used and sold in Australia. APCO facilitates them, and states they will not be fully met in that timeframe. A revised date will be set. The targets page does not name it, and it still shows 2022-23 progress. With the support of Australia's environment ministers, APCO says the targets continue beyond 2025 as the benchmark.
The latest figures APCO has published are for 2023-24, released on 1 December 2025: 86 per cent reusable, recyclable or compostable, against 100 per cent; 20 per cent of plastic packaging recycled or composted, up from 19 per cent, against 70 per cent; 44 per cent average post-consumer recycled content, against 50 per cent; and a 46 per cent reduction, from the 2017-18 baseline, in the priority single-use plastics it measures. APCO has not published a 2024-25 edition.
In that release, 73 per cent of rigid plastics had good recycling potential and 28 per cent of rigid plastic was recovered. Flexible-plastic reprocessing capacity was 7 per cent of flexible plastic placed on the market: capacity, not a recovery rate.
The rule that already applies
DCCEEW's reform page, updated 4 November 2026, says the co-regulatory arrangement remains. It is the Australian Packaging Covenant, administered by APCO, and the 2011 Used Packaging Materials NEPM, applied by the states and territories.
The framework page, updated 6 February 2026, states that a business in Australia which makes or sells packaging and has an annual turnover of 5 million Australian dollars or more must join the Covenant, report under the NEPM, or join another approved program with the same result. APCO limits the Covenant route to a business that meets the NEPM brand-owner test. On an imported private-label or controlled-brand pack, confirm who that is. The plant prints the signed file. That does not make the plant the Australian brand owner. Shiiv Imports arranges the factory and the file. We do not choose the reporting path. We hold ISO 9001 for sourcing and the file, within the certified scope. A partner factory may hold a GFSI-benchmarked certificate for the site and scope named on it. Verify that scope: it does not assess kerbside recovery, and it is not a Shiiv Imports certificate. We do not hold BRCGS, SQF, FSSC 22000, IFS, HACCP or Halal as our own.
PREP first, then the label
The Australasian Recycling Label is the household on-pack label for Australia and New Zealand. APCO runs it for members through PREP, the Packaging Recyclability Evaluation Portal. A compliant member assesses the pack in the tool. APCO's FAQ says PREP uses shape, size, weight, inks, adhesives and materials, then collection, sortation in a materials recovery facility, and later reprocessing. The result is recyclable, not recyclable, or conditionally recyclable if the consumer must follow an instruction. The ARL goes on-pack only after that assessment.
The ARL program manual (version 2, 27 May 2025) sets Australian collection bands: Recyclable at 80 to 100 per cent of the population with a council service, Check Locally at 60 to 79 per cent, and Not Recyclable at 59 per cent or below. It also asks whether at least 70 per cent of the primary material will be recovered. New Zealand kerbside acceptance follows territorial-authority guidance, so the Australian result is not the New Zealand label.
A sleeve or a colour can change the result when the polymer name looks familiar. Put the PREP report and the disposal words in the signed print file, as the artwork note describes. A change of polymer, label or adhesive is a new file under the spec-change note. Pallet base and the GTIN are a separate lock, in the pallet note. A foodservice tub that stays in a kitchen is not household kerbside, and the label does not clear a Food Standards Code check.
Design rules that are not finished
In 2022, environment ministers agreed to reform packaging regulation. DCCEEW's Design for Kerbside Recyclability Grading Framework was proposed in 2024 and consulted on through 2026. The reform page says an updated version is in development, and that no decision has been made on its use. The ARL manual says a finalised framework may influence label criteria.
On 18 September 2026 ministers agreed a Circular Economy Roadmap. The communique asks officials, with industry and local government, to examine stronger rules under the existing arrangements and to draft a reform plan under National Competition Policy for the next meeting. Design standards are part of that work, as is harmonising rules on soft plastics. No new design standard is in force.
The 18 September 2026 media release said ministers would explore harmonising bans where the rules already differ. The starting list includes EPS food trays, loose expanded plastic packaging such as packing peanuts for products under 45 kilograms, confetti and balloon accessories, degradable plastics designed to fragment, and heavyweight shopping bags. That is not a Commonwealth ban already in force. Check the state or territory that will sell the pack, and do not hold a print slot for a rule still being written.
What to lock in the brief
- Separate material specifications for the consumer pack and any foodservice pack.
- Every component PREP asks for, and the PREP classification for Australia and, if you sell there, New Zealand.
- Whether the brand owner is in the ARL program, and the disposal words inside the signed print file.
- A line that a material or decoration change reopens PREP and the artwork.
- The brand owner's Covenant or NEPM path, checked with that business, not taken from a factory email. See the buyer FAQ on sharing the file.
Send the pack format, the channel and whether a PREP report already exists with a private-label brief, or a sourcing brief if the line is not yet own brand. We reply within one business day. The brand owner still signs the file and owns the reporting decision.
Questions buyers ask
Does a recycling symbol from the export market count as the Australasian Recycling Label?
No. The ARL follows a PREP assessment of that pack in the Australian or New Zealand system. A home-market symbol is not that assessment.
Is a national packaging design standard already in force?
No. DCCEEW says the kerbside grading framework is still being updated, and that no decision has been made on its use. The Covenant and the NEPM still apply.
Shiiv Imports Insights. Shiiv Imports Pty Ltd (ABN 15 158 243 442 / ACN 158 243 442). Trading name Shiiv Imports. Public email sales@shiv-impex.com. Cities: Sydney, Auckland, Singapore, Ahmedabad, India, Texas, USA. Not legal advice. Sources: Australian Packaging Covenant Organisation, National Packaging Targets, Consumption and Recovery Data 2023-24 (1 December 2025), targets beyond 2025, ARL and PREP FAQ, ARL program manual version 2 (27 May 2025); Department of Climate Change, Energy, the Environment and Water, packaging reform (updated 4 November 2026) and the co-regulatory framework (updated 6 February 2026); Environment Ministers' Meeting communique, 18 September 2026; Minister for the Environment and Water, 18 September 2026; PREP.
