Industry insight

Pallet base and barcode fit for imported grocery: what buyers should lock before the first drop

A factory pallet and a factory barcode are not automatically the ones an Australian or New Zealand distribution centre will receive or scan. Lock the platform, the carton count and who allocates the GTIN before the first purchase order.

Written for supermarket category managers, private-label and controlled-brand managers, and QSR or foodservice buyers. Shiiv Imports Pty Ltd trades as Shiiv Imports. We are a sourcing agent, importer and private-label builder, not a manufacturer. Read this beside the marked net quantity. Public email sales@shiv-impex.com. The desks are in Sydney, Auckland, Singapore, Ahmedabad, India and Texas, USA.

Which pallet will the warehouse accept?

A factory diagram is not a receiving rule. If the stock is coming into our 3PL facility in Wetherill Park, pallet and barcode fit is confirmed as part of warehousing and storage. CHEP publishes the Australian Assured Wooden Pallet at 1165 mm by 1165 mm by 150 mm, with an average tare of 38 kg and a tolerance of plus 25 kg and minus 8 kg. Drive-in racking is rated at a maximum payload of 2,000 kg, and the static load at 10,000 kg. Confirm the warehouse limit and the hire pool. CHEP says the sheet can change.

The CHEP New Zealand page lists the NZ blue pallet at 1200 mm by 1000 mm by 140 mm, tare 30 kg, and describes it as the ISO 1200 mm by 1000 mm size. It also lists the Australian 1165 mm square pallet and a European pallet at 1200 mm by 800 mm. The buyer names the footprint the warehouse will receipt. Those bases do not share a stow, so recalculate the case count in the landed-cost picture, including any rebuild onto a hire pallet. A frozen load still needs the cold-chain record.

Does an untreated wooden pallet clear the border?

The Department of Agriculture, Fisheries and Forestry says, in its guide for food importers, that all biosecurity requirements must be met before Imported Food Inspection Scheme requirements apply. On the timber packaging page, solid timber must be treated and declared, including a mix with plywood. DAFF asks for the ISPM 15 bark tolerance and an ISPM 15 treatment, or a BICON offshore treatment. Untreated timber can be treated on arrival, exported or disposed of at the importer's expense. Wholly processed plywood, veneer or reconstituted wood, free of solid wood, unprocessed bamboo, bark and soil, need not be declared as timber packaging. ISPM 15 covers raw wood packaging and exempts processed wood such as plywood, particle board, oriented strand board and veneer. A plastic pallet is outside that timber rule. An unaltered ISPM 15 mark stays compliant, but visible pests can still mean treatment, export or destruction.

For New Zealand, the Ministry for Primary Industries says wood packaging must meet New Zealand biosecurity requirements. The importer meets the import health standard, arranges treatment where it is needed, reports pests or disease, and keeps the records. An Australian timber clearance does not clear a New Zealand border.

Who allocates the GTIN on an imported line?

A GTIN is the number in the barcode. GS1 Australia defines a trade item as a product or service that is priced, ordered or invoiced, so the consumer unit, the inner, the case and a standard pallet can each have their own number.

The allocator is the party that warrants the declarations. It licences a GS1 Company Prefix, or individual GTINs, for its sole use. That party may be the manufacturer selling under its own brand, an importer or wholesaler selling under its own name or changing the packaging, or the retailer selling under its own private label. GS1 still treats the older phrase, brand owner, as this same role.

On a catalogue line that stays the maker's brand, the maker allocates. On private label and a controlled brand, the party named in the brief allocates from its own prefix. Shiiv Imports Pty Ltd does not invent a barcode. GTIN-13 is the usual retail format. GTIN-14 is for a distribution item that is not sold at a point of sale. From 1 January 2019, an assigned GTIN is not reassigned to another trade item, aside from narrow exceptions for some unpublished or draft numbers.

When does a pack change need a new barcode?

A change in the legally required declared net content, such as net weight, volume or count, needs a new GTIN at the retail unit and at every higher level. A suggested serving size is not that change. A change in the count of units in a case, or of cases on a predefined pallet, needs a new GTIN at the higher level only. The GTIN Management Standard uses a case moving from 8 trade items to 12, and a pallet moving from 12 cases to 16. The measurement mark stays a separate check.

What is an SSCC, and when do you need one?

An SSCC identifies one logistic unit. GS1 Australia describes an 18-digit number, marked with application identifier 00 and encoded in a GS1-128 barcode. The builder of the unit, or its brand owner, assigns it. It stays for the life of that unit and is not reused within one year of the shipment date. The prefix does not identify where that unit was built. If the warehouse asks for the label, name who prints it and which lines sit beside it: GTIN, count, lot and date. A retail barcode on the outer does not identify that pallet. A rebuilt hire pallet needs a new SSCC from the prefix of the party who builds it. Recall lot language sits in the traceability note.

What should you lock before the first purchase order?

Shiiv Imports holds ISO 9001 for sourcing, supplier selection and the file. That certificate does not allocate a GTIN or treat a pallet. Where a partner factory holds HACCP, or a certificate under a scheme that GFSI benchmarks, the document belongs to that site and the named scope. GFSI benchmarks schemes. It does not certify a barcode or a pallet. The quality page sets out the file.

  • Footprint, height including the pallet, gross weight, and overhang.
  • Cases per layer and layers, matching the outer GTIN.
  • Who allocates the retail GTIN and the case GTIN.
  • Whether net content or case count needs a new number before print.
  • Who assigns the SSCC, including after a rebuild.
  • Solid-timber treatment and the packing declaration for that border.

Send the product, the pack, the channel and the distribution centre with a sourcing brief, or a private-label brief. See the FAQ. We reply within one business day.

Questions buyers ask

Does the factory barcode work on an Australian shelf?

When the maker still warrants the declarations and sells under its own brand, that GTIN is the number in Australia and New Zealand. Private label uses the allocator named in the brief, from that party's own prefix.

Does a change in carton count need a new retail barcode?

Not by itself. GS1 assigns the new GTIN at the higher packaging level. The retail unit keeps its number unless the declared net content also changes.

Is an SSCC the same number as the product barcode?

No. A GTIN identifies the trade item. An SSCC is an 18-digit identity for one logistic unit, such as this pallet.

Does ISO 9001 at Shiiv Imports allocate the GTIN or certify the pallet?

No. ISO 9001 covers sourcing, supplier selection and the file. The GTIN allocator is the party who warrants the declarations. A plant certificate belongs to that site and scope.

Shiiv Imports Insights. Shiiv Imports Pty Ltd (ABN 15 158 243 442 / ACN 158 243 442). Trading name Shiiv Imports. Public email sales@shiv-impex.com. Cities: Sydney, Auckland, Singapore, Ahmedabad, India, Texas, USA. Sources: CHEP, Australian Assured Wooden Pallet; CHEP New Zealand, shipping pallets; CHEP, NZ blue pallet; DAFF, How to import food into Australia; DAFF, Timber and bamboo packaging; DAFF, ISPM 15; MPI, Importing wood packaging and ISPM 15 material; GS1 Australia, GTIN; GS1, declared net content; GS1, GTIN Management Standard; GS1 Australia, SSCC.

A pallet still open?

Send the brief.

Product, pack, channel and the distribution centre. We reply within one business day on how the file is shared under NDA.